1-732-446-9200        Contact Us        Sign in

Heavy-duty Pulley Clutch Noram 160021


In stock
Out of stock
Our price

Email me when the price drops  


Email me when back in stock  

Replaces OEM:

  • MACKISSIC: 030-0164
  • NORAM: 160021
  • Troy Bilt: 1762055


  • 1" bore ball bearing style hub for smooth running
  • 1/4" keyway, 4" OD pulley
  • Fits A or B belts
  • For 1/2" or 5/8" section belts
  • For 3 thru 10 HP rating
  • Keyway: Ground
  • One piece machined steel pulley and drum to withstand high shock loading, heavy-duty
  • Upgrade from the original
  • Customers Also Bought

  • Customer Reviews

  • Send to Friend

  • Husqvarna Line Trimmer Housing Starter 525455501

    OEM Husqvarna Part Part # 525455501 Part # 525 45 55-01

  • Blades Ariens Bad Boy Bunton Dixie Chopper Exmark Gravely Toro 60 Deck

    Replace OEM:
    ARIENS: 08899100 ARIENS: 09081200
    BAD BOY: 038-6002-00 BAD BOY: 038-6050-00
    BUNTON: PL7441
    EXMARK: 1-603283 EXMARK: 1-603874 EXMARK: 1-633483 EXMARK: 103-0301 EXMARK: 103-0301-S EXMARK: 103-1580-S EXMARK: 103-2530 EXMARK: 103-2530-S EXMARK: 103-3231 EXMARK: 103-3232 EXMARK: 103-3232-S EXMARK: 103-3233 EXMARK: 103-3233-S EXMARK: 613072 EXMARK: 613112 EXMARK: 613250 EXMARK: 633483
    GRAVELY: 025124 GRAVELY: 046999 GRAVELY: 08781800 GRAVELY: 08781851 GRAVELY: 08899100 GRAVELY: 089046 GRAVELY: 08904651 GRAVELY: 08979600 GRAVELY: 090812 GRAVELY: 09081200 GRAVELY: 46999 GRAVELY: 48864 GRAVELY: 89796 GRAVELY: 8979651
    TORO: 105-7718-03 TORO: 1057718 TORO: 108-1114 TORO: 108-1123

    Fits Models: BAD BOY Requires 3 for 60 deck
    BUNTON Requires 3 for 60 deck
    EXMARK 60 mower deck Lazer Z or Turf Ranger, newer models
    TORO Requires 3 for 60 deck

    Length: 20 1/2 Center Hole: 5/8 Width: 2 1/2 Thickness: .203
    S/F: Straight


  • Set of 2 High Back Seats John Deere VG11696 AM133476 Gator HPX Trail


    •     JOHN DEERE: AM133476
    •     JOHN DEERE: VG11696

    Fits Models

    •     JOHN DEERE Gator HPX Trail, Trail, TH, TX, TX Turf, XUV,4X2, 6X4 and CX

    Central drain
    Corrosion resistant
    Fully waterproof vinyl
    Made by an OEM supplier
    Multi-hole mounting pattern
    Seat Width 18.7"
    Size 18 3/4" W x 22" D x 18 5/8" HT
    Use 4 each 5/16x3/4"NC bolts 18 TPI (NOT included)
    Yellow color



  • Tecumseh Replacement Carburetor 640330A OHV 140 170 175 180

    Replaces OEM

    • Tecumseh 640330A  

    Includes Gasket, Fuel Shut off Solenoid and Factory Warranty

    Fits Models

    • OHV140 / OHV170 / OVH175 / OHV180 / OV490
  • Set of 6 MTD AYP Snapper Deck Spindle Bearings 941-0919


    •     ALLIS CHALMERS: 1652231
    •     ARIENS: 05412300
    •     AYP: 129895
    •     BRIGGS & STRATTON: 99158
    •     CASTELGARDEN: 1921032/0
    •     Cub Cadet: ST207
    •     Cub Cadet: SU-9001310-0001
    •     Honda: 91102-VA4-013
    •     HUSQVARNA: 532 12 98-95
    •     JOHN DEERE: AM124479
    •     JOHN DEERE: JD10363
    •     JOHN DEERE: JD7677
    •     Kubota: 08101-06204
    •     LESCO: 050384
    •     MASSEY FERGUSON: 350396X1
    •     MASSEY FERGUSON: N1568
    •     MTD: 741-0919
    •     MTD: 941-0919
    •     Murray: 55541
    •     Murray: 55541MA
    •     REF NO: 6204-2RS
    •     SIMPLICITY: 118011
    •     SIMPLICITY: 118011SM
    •     SIMPLICITY: 2118011
    •     SIMPLICITY: 2118011SM
    •     SNAPPER: 1-2828
    •     SNAPPER: 7012828
    •     SNAPPER: 7012828YP
    •     TORO: 112-0377
    •     TORO: 251-204
    •     TORO: 251-224
    •     TORO: 251-297
    •     TORO: 251-318
    •     TORO: 251-8
    •     Troy Bilt: 1185121
    •     Troy Bilt: 1728255
    •     Wacker: 0182662


    •     AYP 917.270722, bottom bearing on spindle assembly
    •     MTD 491, 831, 832 and 930 series snowthrowers
    •     SNAPPER 60370 and 80499, 54" cut decks

    ID: .785 "
    OD: 1.850 "
    Height: .550 "
    Honda code 3175999



  • Oregon CS250E Cordless MAX 14" Chainsaw 2.4Ah Endurance Battery CS250-E6 Bar Oil

    • Instant start cordless convenience with no pull cords, no warm-up and no gas-oil mixing
    • Includes endurance use battery pack (2.4 Ah) for long run-time and power
    • 14-inch bar length with 2,350 rpm no-load chain speed
    • Built-in chain sharpening system; sharpens on the saw, on the job, in seconds
    • Cuts up to 250 branches 2-3 inches in diameter non-stop on a single battery charge
    • Include 1 Quart Premium Bar Chain Oil

    The OREGON PowerNow CS250E6 40V Max* Chainsaw Kit with Endurance Battery Pack is a lithium ion battery-powered chainsaw that delivers a combination of performance and features that makes it a true alternative to many gas-powered chainsaws. When not in use, the lithium ion battery pack holds a charge for months at a time, so the PowerNow Chainsaw is ready when you are. Equipped with a 14-inch bar, the PowerNow Chainsaw can power through logs as large as 10 to 12-inches. For smaller cuts, the CS250E6 chainsaw goes non-stop, cutting up to 250 two to three inch branches on a single charge. This performance may vary with user technique, chain sharpness, size and type of wood. The PowerNow Chainsaw is much quieter than gas-powered chainsaws in use and is silent between cuts. The PowerNow Chainsaw features the PowerSharp built-in chain sharpening system so you’ll never cut with a dull chain again. When the chain dulls, simply pull the PowerSharp lever for 3 to 5 seconds with the saw running and the chain will work like new. The OREGON PowerNow CS250E6 Chainsaw Kit features the 2.4Ah B400E 40V MAX* Battery Pack. The B400E has no memory effect, charge maintenance and full discharge is NOT necessary to retain consistent capacity throughout the life of the battery. A completely discharged B400E battery pack will take approximately 120 minutes to charge on the C600 Standard Charger. (*Fully charged battery voltage measured without a workload is 40 volts. Nominal voltage is 37)

    With its tough 14-inch bar, the PowerNow can power through logs as large as 10 to 12 inches, or cut up to 125 to 250 2- to 3-inch branches nonstop on a single charge depending on standard or endurance battery.
    Whether you're removing trees, cleaning up after a storm, pruning large branches, or clearing debris from property, the PowerNow chainsaw is up to the challenge.
    CS250 user wide
    Smaller and quieter than gas-powered chainsaws.

    Part of Oregon's PowerNow 40-volt Max battery platform, the CS250-E6 trimmer comes with an extended battery pack (2.4 Ah) as well as a charger. It's also available in a model with a standard battery pack (1.25 Ah) as well as a version without a battery pack or charger -- a great option if you've already purchased a 40-volt Max battery (or several batteries) with other Oregon cordless tools.

    Power Without the Hassle
    The PowerNow chainsaw starts instantly with the pull of a trigger: no frustrating pull cords, no messy gas cans, and no slow warm-up times. The chainsaw is also much quieter than gas-powered chainsaws, and is completely silent between cuts. And weighing at 11 pounds (with optional standard battery pack), the CS250-E6 chainsaw is easy to wield whether you're cutting a tree trunk below you or a tree branch above.

    More importantly, the CS250-E6 offers these hassle-free benefits without sacrificing an ounce of power. The chainsaw cuts with no-fade strength, so you can keep cutting with the same intensity even as the battery drains to a quarter charge or less. Plus, the lithium-ion PowerNow 40-volt Max battery pack holds its charge for months at a time when inactive, so the CS250-E6 chainsaw is ready when you are. You can also keep additional PowerNow battery packs on hand for bigger jobs, as the interchangeable packs swap out in seconds.

    CS250 sharp
    Built-in PowerSharp sharpening system -- from dull to sharp in 3 to 5 seconds.

    Sharp and Safe
    The chainsaw comes with a built-in PowerSharp chain sharpening system, so you'll never cut with a dull chain again. When the chain starts to lose its edge, simply pull the PowerSharp lever for three to five seconds with the saw running and the chain will work like new.

    To protect you while cutting, the PowerNow includes such features as a built-in safety chain brake, a low kickback chain/guide bar, a safety trigger interlock, and a patent-pending control board with overload and heat protection.


    Guide bar length 14 inches
    Chain type PowerSharp
    Chain pitch/gauge 3/8-inch low-profile pitch, 0.05-inch gauge
    No-load chain speed 2,300 rpm
    Oil lubrication system Automatic
    Oil tank volume 5.9 ounces
    Battery nominal capacity 2.4 Ah / 89 Wh
    Battery run time Up to 250 cuts on 1-3" Branches
    Tool weight 9.3 pounds

    What's in the Box
    CS250-E6 40-volt Max cordless chainsaw; 14-inch guide bar; PowerSharp chain; extended 40-volt lithium-ion battery pack (B400E); charger (C600); operating instructions.

    oregon CS250 tall
    This CS250-E6 comes with an extended battery pack.
    oregon CS250 tall
    Powers through logs as large as 10 to 12 inches.


  • Atlas Glove Atlas Snow Blower PVC coated Winter Gloves X-Large

    Delivers warmth, comfort and protection in cold and wet conditions
    Remains flexible down to -4 degrees
    PVC coated & fleece-lined
    Size: X-Large

  • OEM Spec Replacement Exmark Idler Pulley 1-633109 1164667 21/32" X 6-3/4"

    Replaces OEM

    • Exmark: 1-633109, 116-4667, 633109
    • Toro: 1-633109


    • HEIGHT:  1-3/16"
    • ID:  21/32"
    • OD:  6-3/4"
  • Throttle Control Cable Assembly Replaces Murray 21223PA 21223 2122PA

    Throttle Control Cable Assembly 
    Replaces OEM
    Murray 21223PA
    Murray 21223
    Murray 2122PA
    CONDUIT:  60"
    INNER WIRE:  64-1/2"
    WIRE TRAVEL:  1"


Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

  Sign in to post a review

: *
: *
: *

Live Chat Support Software